Average Reviews:
(More customer reviews)I purchased this drum sander a week ago.
I am rating the Performax 22x44 Plus Drum Sander with Closed Stand.
The stand is completely assembled in the box.This is the first machine that I have assembled and didn't have any extra bolts or washers.Assembly was exactly as it was supposed to be with everything lining up perfectly.All allen wrenches were provided for assembly.
I only had to tighten the brake pedal.The paint job is wonderful.
The motor assembly is extremely heavy, however, I was able to assemble the entire machine in 20 minutes.
I purchased the optional infeed/outfeed tables and think they are great but should cost less than $100, more like $50. No, they should be included, but are not necessary.
Performance:The motor is unbelievable quiet. No vibration at all. It is hard to tell sometimes if the motor is running it is so quiet. I sanded a 14 inch wide board and the results were amazing.Dust collection is a must and my Delta 1200 CFM pulls 99% of the dust.
I use a 30 AMP service for the drum sander.
Drum alignment was spot on.It was only off by .002 of an inch.No adjustment needed at all!
I give it 4 stars because the mobile base moves inline and does not allow you to easily steer the machine.I also wished the conveyor motor was a little beefier.No problems.I just would like the assurance.The motor adjusts from 0 to 10 fpm.
(Update 12-1-06:I received the "handy" tool to assist with sanding belt changes.I COMPLETELY disagree with the instructions for changing the sandpaper on the drum.It is not necessary to use this tool.I and my family think this way is much better:Attach the paper to both sides, but do NOT tighten it on the motor side as instructed.Simply tighten it by hand on the left side where you have much more room and can do it with your fingers.If you own this tool you will see exactly what I am talking about.It is so easy this way.
I am so happy I received this machine.It was given as an early Father's Day gift.
4/09 Update: If I were looking today for a sander, I would take a hard look at Steel City's dual drum sander. You can put two different grits of paper on the machine and really move things along. The price is so close. You also get two four inch dust ports on it. I would buy it now if I didn't already have the Jet/Performax. honestly
Click Here to see more reviews about: JET 649005K 22X44 Plus 22 Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-Phase
Product Description:
Whether you're a hobbyist or serious craftsperson, the JET 649005K 22X44 Plus 22-Inch 1-3/4 HP Drum Sander, 115-Volt 1-Phase will provide the smooth, consistent sanding you need to finish projects both big and small. One of the largest sanders available in its class, the 22X44 Plus allows you to sand material up to 44 inches wide with better accuracy than any other sander in its category.
The JET x628900 Mini 10-Inch
Benchtop Drum Sander offers:
A continuous duty, 1-3/4 HP motor designed for heavier use over longer periods of time
"SandSmart" technology that automatically maintains the highest feed rate without overload
Patented conveyor belt "trackers" that reduce the need for manual belt adjustments
A precision-machined aluminum drum that self-cools to protect work surfaces
Patented conveyor belt "trackers" dramatically reduce the need for manual belt adjustments. View larger.Innovative SandSmart Technology for Automatic Speed Regulation
The 22X44 Plus features Jet's "SandSmart" control that continually monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload. If the load on the drum motor increases, the SandSmart control will decrease the conveyor feed rate and will stop the conveyor under extreme conditions.
If the load on the drum decreases, SandSmart will increase it faster than the manual setting on the speed adjustment label. This feature works in conjunction with a red indicator light that goes on when the SandSmart control has detected too great a depth of cut and/or too fast a speed rate.
High Capacity for Improved Productivity
The 22X44 Plus flawlessly sands pieces of stock with a 44-inch width in just two passes, whether you're at the maximum workpiece thickness of four inches or the thinnest, which is 1/32 inch. For added convenience, operation is smooth, quiet, and vibration-free.
"Trackers" and Self-Cooling Drum for Consistent Performance
Jet's patented conveyor belt "trackers" dramatically reduce the need for manual belt adjustments, while the precision-machined, balanced, extruded aluminum drum self-cools to protect the surface being sanded from heat damage.
Sealed Drum Ball Bearings and Reinforced Steel Conveyor Belt for Durability
Boasting quality construction and materials from top to bottom, the 22X44 Plus is built to last. Sealed and permanently lubricated drum ball bearings ensure longer life, while the precision-flattened, reinforced steel conveyor belt and no-give power feed belt provide a flat, durable sanding surface for better results, job after job.
Cast-Iron Handwheel and Adjustable Drum Height for Precision
To ensure precision, the cast-iron handwheel adjusts height at 1/16 inch per turn for sanding thickness control and precise stock removal, and the drum height and downward pressure are both adjustable to virtually eliminate snipe. And to prevent slippage, zinc-plated steel tension rollers mount right next to the drum.
Continuous-Duty Motor for Heavy Use Over Longer Periods
Equipped with a continuous-duty, 1-3/4 HP motor, the 22X44 Plus is specially designed for heavier use over longer periods of time. This one-feed/one-drive motor model also allows for superior sanding control with a wide range of different wood types.
Operator-Friendly Design Improves Productivity
Made to be operator-friendly, the 22X44 Plus boasts patented abrasive take-up fasteners for quick and easy changes. The on/off switch has overload protection and is front-mounted for accessibility and to help prevent accidental start-ups.
The 22X44 Plus requires minimal assembly, weighs 345 pounds, and is backed by a five-year warranty.
About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
Get 33% OFF
Want to read more honest consumer review about JET 649005K 22X44 Plus 22 Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-Phase now ?
